engFront Loader PF-1,2
Front loader PF-1,2 is a rigging unit mounted on a tractor, capable of moving various loads using various quick-change tools (buckets for various purposes, bale forks, timber forks, bale gripper, universal gripper, etc.). Lifting capacity is 1.2 t, main bucket coverage is 2 m.
Sound “PRO” Arguments for Loader PF-1.2:
- Load capacity of 1.2 t with lifting height of 4 m;
- Wide range of quick-change tools for different kinds of work (option);
- Rigid design of load brackets additionally connects the front beam, side member and rear axle of the tractor, reduces the load on the KPP crankcase, protecting it from breakage;
- The loader can be equipped with a joystick and an additional hydraulic valve with the ability to control 3 hydraulic lines, which speeds up and simplifies the process of loader control;
- The loader is made of high-quality materials, steel grades 20, 45, 40Х are used in the design.
|
Parameter name
|
PF-1,2 |
|
|
Type |
mounted |
|
|
Hitch |
frontally |
|
|
Load-bearing capacity, t (kg) |
1,2 (1200) |
|
|
Operating speed, km/h |
Up to 6 |
|
|
Transport speed (without load), km/h |
Up to 16 |
|
|
Dimensions of the unit (MTZ-82,1 +PKU-0,8), mm |
length |
7200 |
|
width |
2000 |
|
|
height |
4800 |
|
|
Lifting height (from the ground level up to the lower surface of the bucket located horizontally), m |
4 |
|
|
Bucket unloading angle, degree |
50 |
|
|
Bucket loading angle, degree |
45 |
|
|
Drive |
from the hydraulic system of tractor |
|
|
Track of front/rear wheels, m |
1,5-1,8 |
|
|
Counterweight, kg |
800 |
|
|
Number of operating staff, persons |
1 |
|
|
Coupled with the tractors of drawbar category 1,4 |
MTZ-80/82/82.1/892 and other modifications |
|
